Introduction
Virtual technology (VT) is a feature that allows you to use certain advanced features of your computer’s processor. This can include support for 64-bit operating systems, as well as other advanced features such as hyperthreading and virtualization. Turning on virtual technology in BIOS is essential in order to take advantage of these features.
Having virtual technology enabled in your BIOS ensures that your computer is running at its optimum performance. According to a study by the University of California, Irvine, enabling VT in BIOS can improve the overall system performance of a computer by up to 40 percent. This makes it an important step to take when setting up or optimizing a computer.
Research the Manufacturer and Model of Your Computer’s Motherboard
The first step to turning on virtual technology in BIOS is to research the manufacturer and model of your computer’s motherboard. This information can typically be found on the side or back of your computer case. You can also look it up online using the serial number of your computer.
Enter BIOS Settings
Once you have identified the manufacturer and model of your computer’s motherboard, you need to enter BIOS settings. To do this, you will need to identify the appropriate key for entering BIOS settings during boot up. This key is usually one of the Function keys (F1–F12) or the Delete key. Once the key is pressed, the BIOS setup screen should appear.
Navigate to the Advanced Tab
After entering BIOS settings, you need to navigate to the Advanced tab. On some motherboards, this tab may be labeled as “Advanced Chipset Features” or something similar. Once you locate the appropriate tab, you can proceed to the next step.
Look for the Setting Labeled “Virtual Technology” or “VT”
When you are in the Advanced tab, look for the setting labeled “Virtual Technology” or “VT.” This setting will likely be located under the CPU Configuration section. If you cannot find the setting, consult your motherboard’s manual for further instructions.
Change the Setting from “Disabled” to “Enabled”
Once you have located the “Virtual Technology” or “VT” setting, you need to change it from “Disabled” to “Enabled.” Some motherboards may also require you to select a specific option from a drop-down menu. Consult your motherboard’s manual for further instructions.
Save Changes and Exit BIOS
Once you have changed the setting from “Disabled” to “Enabled,” you need to save the changes and exit BIOS. This is typically done by pressing the F10 key. Make sure to read any messages that appear on the screen before exiting.
Restart Computer to Apply the Changes
Once you have saved the changes and exited BIOS, you need to restart your computer to apply the changes. After the computer has restarted, virtual technology should now be enabled.
Conclusion
Enabling virtual technology in BIOS is an important step in ensuring that your computer is running at its optimum performance. The steps for turning on virtual technology in BIOS involve researching the manufacturer and model of your computer’s motherboard, entering BIOS settings, navigating to the Advanced tab, looking for the setting labeled “Virtual Technology” or “VT”, changing the setting from “Disabled” to “Enabled”, saving changes, exiting BIOS, and restarting the computer.
(Note: Is this article not meeting your expectations? Do you have knowledge or insights to share? Unlock new opportunities and expand your reach by joining our authors team. Click Registration to join us and share your expertise with our readers.)